Shimano Dura-Ace Di2 Seat Tube Bottle Cage Relocator Save $0.02 off
Buy Shimano Dura-Ace Di2 Seat Tube Bottle Cage Relocator Now
Soda Bottle Water Rocket Launcher Fabricated Parts Kit Save 21% off
The only minor draw back is that it does not have a built-in pressure gauge. That would be a nice additional-cost option.
I am glad I purchased this inexpensive kit instead of making several trips to the hardware store perfecting my own design.
We tried it out today, and it worked impressively on the first try. After several launches, it''s still working flawlessly without need for adjustment.
There isn''t a kid under 80 years old who won''t be impressed with what happens after the countdown.This package arrived today and I went straight to work assembling the rocket launcher from the PVC pieces and attachments. My work was slowed down by the fact that I wanted to demonstrate to my five year old son how this launcher was put together. I was trying to make this experience into an educational one. In our modern age products just arrive in the mail and they just work straight out of the box, remember the days when you had to be creative and constructive? Me too and I was trying to share that with my son.
After a few minutes of making my way through the instructions, which were excellently laid out for me, my son lost interest in the assembly portion of the project. He just wanted it to be launch time. So just so you know, assembly make take upwards of a half hour. You have to hunt down the needed tools and items (PVC cement, scissors, tape measure, screwdriver, etc.). After that there is aligning and adjusting the pieces so that they fit and look perfectly (I like things to be perfect when it comes to projects).
But after assembling all the pieces the largest amount of time is spent making the necessary adjustments to where the lip of the soda bottle meets up with the collar (you''ll know what I''m talking about when you get to this step). I had to use a little creativity and insert duct tape inside the collar to make a tight fit around the lip of the soda bottle. It seemed as if others had this same problem and as I saw it there is no other option, the collar would not be tight otherwise.
Once I had a good tight fit around the lip of the bottle I used an air compressor (with a tire pressure gauge attached to determine pressure) to pressurize the system. After about 50 lbs water will start leaking out around the sides (a bug that I think is inevitable without the use of rubber seals) but I just continued pressurizing until I was at about 90 lbs. The string on the collar mechanism will need some engineering to work properly but (and I don''t recommend this) what I dis was just pull the collar down by hand. That will send the bottle into orbit, ka-pow, my kids loved it. As for me I got a little wet and was off to chase down the bottle from the neighbors yard.
Overall, great product, lots of fun, but you will need to do some work-arounds to get this to work for you.
Buy Soda Bottle Water Rocket Launcher Fabricated Parts Kit Now
For my son''s 7yr old Birthday Party, we decided on a "rocket" theme. Each child decorated their own pop-bottle rocket with stickers and markers, then we launched them with this Rocket Launcher. We had to make a few adjustments several times, but like a real rocket launch, we just went into a "hold" mode. Everyone had a great time!Read Best Reviews of Soda Bottle Water Rocket Launcher Fabricated Parts Kit Here
This is a nice little kit put together with off-the-shelf parts but not something I would have been able to guess how to create myself. I figured I''d save five dollars and put it together with my son but it turned out that the extra materials (PVC cement and duct tape) was another ten dollars so nothing was saved. However the fun and educational value of putting it together ourselves was well worth it. We may be building something larger out of PVC material later so it gave us some good experience with the primer and cement.The trickiest part was the trigger mechanism. There were several hints about how to get it to work on the instructions (which are color with photos and very clear), but we still couldn''t get it to "lock" in place. Instead what I wound up doing was adding a few layers of duct tape to the inside of the trigger tube (large piece of PVC shown in the photo with bright red string) so that it would "stick" in place until it was pulled down.
We also had trouble getting it pumped up beyond about 40psi, even though the instructions suggested a max of 130psi. The water would leak out of the sides and we''d have to pull the trigger before it all leaked out. Even at 40psi however the bottle shot up dramatically about 50+ft in the air. I tried adding some greasy suntan lotion to help with the seal and that seemed to help a bit. We will have to experiment with it some more to see if the leakage can be reduced.
In all a very educational experience for my son and I.
Want Soda Bottle Water Rocket Launcher Fabricated Parts Kit Discount?
If you have ever wanted to build one of these, but kept putting it off, this kit is a great way to just be done with it. Yes, any diy''er with half a brain and handful of tools could goto a local big box store and build a few of these for cheaper, but for guys like me, buying this kit took it from being something I talked about doing to something I actually did.It works well built as seller intended and we are having fun with it.
Cruising Companion 600D Polyester Pet Fanny Pack (Green) Save 17% off
It certainly holds just about anything you''ll need. The front pockets hold my phone, ID card, money, keys, pepper spray, lip balm etc.
I bring along trail mix packs, granola bar, chocolate in the very large rear pocket along with the doggie bags and wet wipes.
The water bottle in front is attached to a drinking tray for the dog. Every time I bent over it leaks. I also did not like the way the bottle smells,
even after washing it many times. So this is what I am doing now, I put a regular 16.9 oz water bottle into the holder. The drinking tray
has a clip on it so I am able to clip it by itself on the belt. This way both my dog and I can drink. The other reason I didn''t give it a 5 star is
the zippers on the front pockets, especially the right one, which is very deep and the zipper goes way down but closes only from one side.
This means you have to zip it all the way around or you might lose something. I would have preferred to zip it up from both sides and
be able to leave it open a bit on top for easy access to the pepper spray.I needed a nice pack to carry all the doggie stuff, and this is working out nicely. Just keep the water bottle away from your dog because ours ate the little stopper off. We still use it for the bowl but have to carry a separate bottle of water. But all the little compartments are very nice.
Buy Cruising Companion 600D Polyester Pet Fanny Pack (Green) Now
Aero Wedge Pack DX, w/ Fixer F25 Save 34% off
For me, this is the right size for a seat bag. It will hold a bit-driver with every hex bit used on my bike, a T-30 for my chainrings, and a Phillips bit, a micro Leatherman, a few spare zip-ties, a small bungie chord, a tire patch kit with 3 tire irons (errr... plastics as it were) some emergency cash, a couple of pair of latex gloves to keep my hands clean of grease if I need to get into the drivetrain, a spare inner-tube and a very small 1st-Aid kit. As you can see from the pics I posted, it also has some VERY useful little loops that can be used to attach the pump in a super-streamlined fashion. I use the Fi:zik seat mount for my rear light, and the reflective stripe remains largely visible. The bungee chord pump retention system also acts like a compression strap and helps hold the bag up and back in it''s most streamlined position. Due to the size of this bag it sits at a different angle and has therefore shown no propensity to slide off its mount.
PS: The pump mount works very well with the Profile Designs AquaRack which, combined with two frame bottle cages, will allow you to carry 96 oz of Polar-protected drinks in a very streamlined position with NO weight on your back or shoulders. In the flats with strong headwinds I put two 24oz bottles on the AquaRack and one small bottle on the downtube, leaving the seat tube aerodynamically clean. IMHO putting the pump in your jersey is just asking for a spinal injury when you fall.
Bondhus 5mmx1" 1/4"dr Balldriver Hex Power BitUse this pack with caution. The quick release mounting rail connection (slide action/release) is prone to failure. I hit a pothole on a descent at 35mph (hard enough to cause a rear pinch flat)and the plastic mounting rail on the bag broke sending the bag into the rear wheel.
The bag was not heavily packed and i wouldn''t consider this excessive abuse. if your roads are a little rough i would make sure to purchase a bag that is secured in all locations with nylon straps, not a rigid connection. happy riding...
Buy Aero Wedge Pack DX, w/ Fixer F25 Now
I got the fixer instead of the velcro because I thought that it would be more secure...boy was I wrong. First time out riding on regular street roads, it snapped. Luckily the velcro that went around the seat post was still in place or else I would''ve lost my keys, license, everything.The bag minus the fixer.. I give it an "A" grade. It had enough room to carry all of my stuff, license, cell phone, camera, spare tube, multi tool, stubby wrench, and levers. And you can even expand it to store more items. Also, there''s a nice reflective strip on the back door.
Read Best Reviews of Aero Wedge Pack DX, w/ Fixer F25 Here
This is a very good quality under-seat pack. I read about the reviewers doubts about the fixer holding up to continued use, but it seems fine to me.My problem with the pack is that it is small. I have a small tire pump in there, an extra tube and tube repair kit, but that''s all that will fit in there. I would like to have had room for a small tool kit, but no go.
For a small amount of stuff, this is a good pack, but I went with the large version instead for my main bike, and am using this on my second bike.Very nice product, held to the bike securely,yet easily removeable. My standard fare includes a tube(700x23), small bicycle multitool, a rear light, tire tools, and a patch kit, and it''s full. If you carry more than that, get the large.
Klean Kanteen Wide Mouth Insulated Bottle (Stainless Loop Cap)
Buy Klean Kanteen Wide Mouth Insulated Bottle (Stainless Loop Cap) Now
I bring my coffee in this to work everyday, even when I get distracted and forget to drink my coffee, it''s still warm hours later when I finally get to it. Also works great on climbing and backpacking expeditions.Read Best Reviews of Klean Kanteen Wide Mouth Insulated Bottle (Stainless Loop Cap) Here
My husband and daughter love this drink bottle. It keeps drinks amazingly cold. We''ve been loyal to Kleen Kanteen for several years and haven''t been let down yet!Want Klean Kanteen Wide Mouth Insulated Bottle (Stainless Loop Cap) Discount?
Nalgene 32-Ounce Tritan Wide Mouth Glow Water Bottle
Buy Nalgene 32-Ounce Tritan Wide Mouth Glow Water Bottle Now
After over two years together, I accidentally left my last Nalgene on a bus, never to be seen again. When I finally overcame the guilt and felt ready to start looking for a new water bottle, I considered other brands and different materials, but I guess I have a type: the super rugged and durable Nalgene. While I really like all the bright colors they come in, the glow-in-the-dark bod of this one really caught my fancy. I decided to give it a chance and it''s worked out really well. In normal lighting, my bottle has a slightly glazed look to it, but in the dark it''s true light really shines. This time I''m trying to be better by giving it the care and attention it deserves; I think we''re going to last!Read Best Reviews of Nalgene 32-Ounce Tritan Wide Mouth Glow Water Bottle Here
No doubt this is just like any other regular nalgene bottle, but just having the glow in the dark part is super fun! I tend to drink too much coffee and soda, so this purchase was a nice way to "entice" me to drink water. I liked it so much, I got the green glow in the dark one too!I find that the bottle stays glowing for a pretty long time, sometimes Ill wake up in the middle of the night to see it still going!
Want Nalgene 32-Ounce Tritan Wide Mouth Glow Water Bottle Discount?
I received a SOLLight LightCap as a gift recently (Light Cap to fit any wide mouth water bottle Available in Several Colors), and did not have a spare translucent water bottle to stick it on. After a short search, I quickly decided that a glow in the dark bottle would be ideal for it.The glow of the bottle is more of a novelty than a practical use for illumination, however it does prove useful for finding the bottle in the dark. When combined with the LightCap, it adds additional value to an already very useful piece of gear.

