Showing posts with label water bottle party favors. Show all posts
Showing posts with label water bottle party favors. Show all posts
Elete Electrolyte Concentrate Save 33% off
Posted by
norelco
on Wednesday, May 14, 2014
Ultimate Direction 20-Ounce Bottle
Posted by
norelco
on Saturday, April 26, 2014
Water never leaks out of this bottle. The best feature is that you can flip it upside down, shake it, run 26 miles and you never lose a drop. That''s why when I lost it, I immediately knew that I had to buy a new one. Get it and hydrate!Just like my original water bottle. If this one lasts 10 years like the old one did, I''ll be happy.
Buy Ultimate Direction 20-Ounce Bottle Now
For the last several years I have been using a Camelbak water bottle which has been excellent, until I started using a intra-workout supplement called Purple in-train by Controlled Labs. Ive never had a problem mixing supplements in my old water bottle, but this stuff would gunk it up pretty good. For the last two weeks I have been mixing my intra-workout drink in this bottle with zero problems. Because the stuff still sticks to the sides of the bottle I have to clean it out on the weekends, but its doing me pretty good. I only wish I had bought the bigger bottle.Read Best Reviews of Ultimate Direction 20-Ounce Bottle Here
Ultimate Direction 20-Ounce Bottle is a good product. It does not leak! I bought one 4 years ago but the cap was wearing out from all the daily use. A new cap can be purchased but there is so little difference in price from purchasing a new bottle and cap combination that I chose to order both pieces.This is a terrible design for a water bottle. I was very surprised I paid more for this than a few bucks. I will have to admit, I huridly bought this at REI and didn''t look at how the water comes out, but this uses a rubber nipple that highly represents a baby bottle. In the picture, it is in the lowered (off) form, but to get water out, you need to extend it about 3 times that size. This is a terrible design, and since it is red, you don''t know when it is absolutely clean anyhow. Also, it would basically be impossible to clean since the rubber is glued to the lid, and since rubber collects mold I assume that it is going to give someone health issues. This "bottle" is only good for a few laughs and since it is impossible to thoroughly clean, probably for only one use.Gaiam 750ml Aluminum Water Bottle (Rocky Mountains)
Posted by
norelco
on Saturday, April 12, 2014
Quick to build up Calcium. Use vinegar and water to remove the calcium buildups.Definitely not as nice as it looks in the pictures, also much more of a royal blue, not dark. Design printed on the bottle is scratched and there are small dents in the metal.
Snow Peak Kanpai Bottle
Posted by
norelco
on Sunday, December 29, 2013
The lids are pretty cool. There is a lid for cold drinks that you store in your freezer. It has a built-in gel pack and nests into the bottom of a can to keep it cold all day. There is a hot liquid lid that seals tightly. The drinking lid is perfectly designed.
"But", you ask, "Isn''t that a pretty stinkin'' steep price for a coffee cup?" Yep, probably. I wrestled with this one for a while. But now that I have it I have really come to appreciate the engineering and design of this product. I am a sucker for well made products and this is a good one.Totally worth the money. This keeps coffee hot, I mean hot, for three hours. Enough said. It''s worth the moneym
MSR SweetWater Microfilter
Posted by
norelco
on Tuesday, August 6, 2013
Filtering ability is, of course, the most important criterion, but I can''t test that and so I leave it to the lab folks. I can say that I''ve never gotten sick drinking water from either model (and given how much I sweat when hiking, I''ve swallowed a LOT of filtered water, much of it downstream from beaver habitat, so you know what that means), so for my purposes I consider the two to be functionally equal in that regard. The Sweetwater is noticeably lighter, which matters to me. The Miniworks does feel more robust (hence the extra weight), and perhaps it is, though I''ve never had anything break on my Sweetwater. Also, it''s cleverly designed to give the pump handle extra mechanical advantage to make the pumping easier (see the pictures and you''ll see what I mean, but note that the handle folds down for easy packing). For both models the ceramic filter has to be cleaned regularly which requires a bit of disassembly. The Sweetwater is cleaned by a brush that runs through the center of the cartridge, which always remains in its plastic casing. The Miniworks'' cartridge has to be fully removed to be scrubbed on its exterior, and so there''s a bit of a risk of breaking it if it''s dropped.
The Miniworks is threaded to screw directly (i.e., without using an outlet hose, although it comes with a hose for other bottles) into a standard Nalgene bottle, or into anything else, such as some hydration bladders, that have the same size and threading. This is convenient but requires that the weight of the bottle or bladder is suspended from the filter while pumping. The Sweetwater instead has an adapter on its outlet hose that fits (but does not thread into) a Nalgene and several other openings, so that the bottle or bladder can sit on the ground while it is being filled.
There are plenty of other filters out there that I haven''t tried and so I have no opinion on them, but I do think that the Sweetwater is a winner.I have had an original "white" model of this filter for many many years and the center filter pump column cracked just a short while ago. The new filter is almost identical except for the color. I consider this filter to be my gold standard for water filters. It works flawlessly and effortlessly. I have had other filters but they are always more difficult to pump. This one has never let me down. You would also find that the company honors the lifetime warranty without question. Great company. I will go out of my way to find products by Cascade design (they have the MRS brand) now because of their great customer support. I called them and told them the center stem had cracked on my 25 year old model and they had me send in the cracked stem and sent me a new one within a week. Another customer I met in a store here told me the same story about his old filter. He also had the same experience with them honoring their warranty.
Buy MSR SweetWater Microfilter Now
I''ve seen the MSR SweetWater used by friends, and my experience with their equipment has been great. This product works as required in colder waters, whereas the ball valve in the MSR MiniWorks Ex would fail.I purchased one of my own on Amazon since it was the lowest price I could find. Upon reception, I read the instructions and performed the initial filter scrubbing as directed. However, upon testing in my kitchen, water gushed out of the rubber seal between the filter housing and the pump. Visual inspection of the o-rings revealed a small divot in the filter housing seal, allowing pressure to force the seal apart just enough to cause the leak. Through all of my testing, not even one drop of water was filtered. I still give the product 2 stars, because for those that are functioning, I have been pleased with the product.
This is the first time I''ve used Amazon''s return system, and I was pleased with the ease. I will try the SweetWater again, but this time I''ll pay a little more at my local REI. Their "no questions asked" return policy and ability for quick returns (since I can walk into the store) will be worth the extra price. My additional inquiries to colleagues and learning of their experiences has indicated that microfilters seem to be "hit or miss" on functionality among most brands and models.
Read Best Reviews of MSR SweetWater Microfilter Here
I have been on trips with people who already had filters for years, thus I never had the need to buy one myself. I just recieved this filter as a present from my inlaws before a big trip in the smoky''s and I have to say that the price, weight, and flow fits the average adventurer. I know there are some lighter options and some faster flows as well but if you want an all around filter this fits the bill. I used to work at a gear store in college and couldn''t decide but this filter will work in any situation. Unless you have a special situation for ceramic filters or ultra light This is the way to go.Want MSR SweetWater Microfilter Discount?
Intake nipple is cracked at base therefore it does not pump. This was the first usage. Test first is obvious, but I was busy getting ready to camp with kids. First usage in the field and it failed me. I was able to make it work by submerging the entire base in the creek. I owned one of these many years ago and it was flawless. If it were not for my previous experience with this company I would not trust my kids drinking from a filter made by a company that can''t even make the intake nipple strong enough. What other defects are there?Apart from my sleeping bags this is my most important piece of gear. I can''t have it fail and I will remain suspect of my filter forever.
Now I have to RMA this filter to Amazon. Joy!! I expected more.
AST BOTTLE TOPS Package of 12 tops
Posted by
norelco
on Wednesday, July 17, 2013
Groove Bite Valves by CamelBak
Posted by
norelco
on Saturday, June 22, 2013
Here are a few situations you may find yourself in:
-You''ve forgotten to wash your bite valve for the last 2-3 weeks. A thin film of gross is developing inside your bite valve. You need to clean it out, toss it in the dish washer, but need the bottle today. Easy! Pop it off, give the top a rinse and stick a replacement on while you get the dirty one cleaned.
-Out hiking when your bottle flips out of your backpack and lands in some dirt. Rinse off the bottle, and replace the cap, which is now covered in mud.
-You''ve had your Groove for nearly a year. ...it''s time to replace that valve regardless, buddy.
At the price of these valves, and that they''re a two-pack makes this a no brainer purchase for the Groove enthusiast. Bacteria LOVE these POC''s (point of contacts) and will grow resistant with each cleaning. For sanitary''s sake, replace your valve each year (I do 6 months, or after unfortunate incidents), or shorter depending on how thorough/often you clean the valve.
I recommend washing at least once a week in the dish washer. Every month take it out and actually swab it out with a Q-tip.
If it begins to turn yellow from bacteria, you''ve done something terribly, terribly wrong. :)I purchased the extra bites valves not too long after I purchased my CamelBak Groove so I would have them on hand. I love all of my CamelBak products and highly recommend these if you have the CamelBak Groove bottle.
Buy Groove Bite Valves by CamelBak Now
It''s great to have a back-up. The original bite valve was getting grubby, and having a backup meant I could put it in the dishwasher and sterilize it. Strongly recommend!Still have to give this product 5 stars, even though I ordered this product by mistake. I didn''t realize Camelbak would have different bite valve replacements for different bottles (totally my fault), so this bite valve does not fit by insulated Eddy style bottle. Order was received fast though (ordered on Thursday for free shipping, and received it Tuesday).Trust the Camelback website, not the description. This Groove nozzle is the same as the one for the Eddy .75L bottle.
